Book a Demo

302-449-0199

Quality inspection systems with benefits you can measure

Fast, accurate, easy-to-use vision inspection systems for precision machined parts.
View Our Systems
Book a Demo Call
imgi_6_oasis-transparent-2-2
imgi_5_DSC_0007-1024x1024
imgi_7_CoreX2-2_NB-1024x1024
imgi_9_CoreX2-9_NB-1024x1024
imgi_17_download-12-1
Increase Efficiency
Save Time
Boost Your Bottom Line

Consistent high quality outputs

Manufacturers of precision turned parts know that quality control is essential when it comes to running an efficient operation that produces consistent high quality outputs, and fewer rejects.

In an ideal world, every manufactured component that leaves the factory would be 100% accurate, but…

  • Manually checking every part is time-consuming and costly.
  • Parts need to be measured accurately and quickly, with a minimum of operator intervention.
  • Other vision inspection systems on the market are complicated, expensive, and difficult to use.
Our vision inspection systems support manufacturing processes to increase efficiency, save time, and boost the bottom line.
View our Systems
FAST

Reduce inspection time from minutes to seconds​

Dramatically reduce the manpower required to check parts, and the time it takes to accurately measure each component.

  • Measures multiple dimensions instantly and simultaneously.
  • Fixed field of view, no need to adjust focus or lighting.
  • Measures at a rate of 6 times per second.
Accurate

Be known for high quality and precision

Build a solid reputation for quality output by checking up to 100% of every lot produced.

  • Conduct up to 100% inspection of parts.
  • Catch errors to minimize rework and rejects.
  • Accurate to +/- 0.0001 inches.
Easy

Start operating without the steep learning curve

Learn to operate the most user friendly and intuitive system on the market.

  • Non-contact, automatic focus and image saving.
  • Maintenance-free and in-house calibration.
  • Anyone can learn to use it.
View our Systems
"The OASIS has reduced our inspection time from 2 ½ - 3 minutes per component to 2 to 5 seconds; reducing the need for an in-process inspector doing inspection audits and allowing the operator to inspect each component 100%.”
Daniel P. - Goodrich Corporation
"The best investment in quality we’ve made in 36 years! In an industry trying to bridge the gap between retiring skilled machinists and the new generation of trainees, the OASIS added in a few days to the level of control we had over machining processes in our shop.”
Randy L. - Lusk Quality Machine Products
"This piece of equipment is amazing! We run 5 CNC Swiss machines across multiple shifts. SOP in the shop was to run the machines at 25 percent rapid override so the operators could keep up with inspections. NO MORE – We have turned all the machines back up to 100 percent rapid. All because of the OASIS.”
Ken J. - Managing Member
"It has improved First Piece and In-Process Inspection time dramatically, allowing both Operators and Inspectors to do their job more efficiently. The speed, accuracy and repeatability this system provides is unequaled in the metrology industry."
- Paul F., Arhtrex Manufacturing
Our Products

OASIS Inspection Systems Products

Over the years, we’ve developed a range of vision inspection systems to support the inspection process of precision machined parts for various applications.

OASIS Elite
A 2D Measurement optical inspection system with a fixed field of view, designed to measure precision parts fast.
View Product
OASIS Elite Dual
Like the Elite but with two fields of view for measuring micro machined parts.
View Product
OASIS Edge Core
A lightweight desktop version of the OASIS Elite with a smaller footprint.
View Product
Frequently Asked Questions
Does the part have to be placed in the same exact position each time?
No, our software has an edge tracking feature, so you do not have to put the part in the same place each time. As long as the part is in the inspection zone, the OASIS will pick up the measurements automatically, significantly saving time on inspection.
Yes, the OASIS can measure both Unified ISO and NPT threads with our optional Premium Software Add-On Module. Commonly used thread sizes are programmed in the software for ease of use. Simply select the thread type from our drop down menu and the tolerances will auto populate. Our thread software measures lead, major, minor, and pitch diameters as well as crest and root truncation.
Calibrating the OASIS is simple and can be done in house, without the added cost of calibration services. For an additional charge, you can purchase a calibration kit with step by step instructions. The calibration process takes no more than five minutes to complete.
Yes, the OASIS easily integrates with numerous SPC software packages for real-time data acquisition and statistical process control. The OASIS also offers its own built in reporting that collects and stores data in real time.
Yes, the OASIS was built to withstand conditions found in a shop environment. Regular maintenance is not required however light cleaning is suggested if the machine becomes dirty. With such a small footprint the OASIS Elite can easily fit on any machine shop floor.
Yes, the OASIS can measure concentricity, run-out, and, parallelism with the addition of one of our optional rotary stages. In the example below we are measuring the run-out by creating a distance from a common horizontal edge to the center of the two diameters. By creating a mathematical equation between the two points and then rotating the part, we can see the run-out value in a 360 degree turn of the part.
Yes, in addition to the standard pedestal that comes with the OASIS we offer an optional 90 glass stage for our Elite and Elite Dual units. Manual rotary stages are available for our 0.4X, 2348 and CoreX2 units and a motorized rotary stage is available for our Elite 2348.
Yes, the OASIS can be used as part of an automation or in-line inspection process. Current OASIS owners have set up their own in-line inspection process incorporating the OASIS. The OASIS measures at a rate of 6 times per second therefore parts can be quickly measured in an automated set-up.
OASIS Elite, and Core units have an accuracy of +/- 0.0001, 2.54 microns. The CoreX2 is accurate to +/- 0.0002. Below is our Gage R & R accuracy test below for repeatability.
OASIS is trusted by
OUR PROMISE TO YOU

The most user friendly vision inspection system on the market

Intuitive
Software
Next-Level
Support
Simple to
Learn
We pride ourselves in creating an easy and simple user experience so that you can focus on the important things instead of wasting time learning how to use a complex machine.

You’ll receive a 90-minute onboarding training to help you get setup with your OASIS system and software. We’re on-hand to answer your questions and help you as you learn to use your system, so that you can start earning your investment back as soon as possible.

Learn About Us
Book a Demo Call
QUICK RETURN ON INVESTMENT

A quality inspection system that boosts your bottom line

At OASIS, our goal is to ensure your investment in one of our inspection systems pays for itself in the shortest possible time. This means the first month, week, or even day of use.

How? We provide you with all of the after-sales support and training you need to get setup and saving, fast.

Try our calculator to see exactly how much money you can save with an OASIS Inspection System.

Calculate Your ROI
Upcoming Trade Shows

See an OASIS Inspection System in action

Visit us at an event or tradeshow in your area.

IMTS 2026

Chicago, IL - Sept 14 – 19, 2026
Read More

PMPTS 2027

Cleveland, OH - May 4 – 6, 2027
Read More

East Manufacturing Series 2027

May 11 - 13, 2027 West Springfield, MA
Read More